Introduction; Technical Features - AVE 441016S Serie Instrucciones De Uso

INTRODUCTION

This multi-function switch with 6 relay outputs and potential free contacts, code 44X016S is a control with
built-in touch sensors. It can be controlled locally and from a number of points with NO pushbuttons. It allows
monostable, timed monostable, bistable, and interlocked operating mode selection, for both timed and "man
in attendance" roller shutter control. It is fitted with LEDS to allow the control to be identified in the dark.

TECHNICAL FEATURES

• Overall dimensions: 3 x S44 modules - depth (33,5 mm; with inputs terminal board: 40 mm).
• Protection level:IP20; IP40 installed
• Terminal boards accessible from the back: • 7 extractable terminals (outputs)
Note: the terminals' capacity does not allow restart connections.
• Power supply: 100-240 Vac 50-60 Hz
• Power supply voltage range: from 90 Vac to 253 Vac
• Absorption on stand-by (no relay activated): 3,5 mA at 240 Vac (0,2 W); 4 mA at 100 Vac (0,1 W)
• Maximum absorption (all relays activated): 13 mA at 240 Vac (1,4 W); 29 mA at 100 Vac (1,7 W)
• Sensitive front panel: the front area is divided into 6 sensitive zones. During programming, the functions to
be assigned to each of these can be chosen: see paragraph 1.1.1.
• Relay output: 6 closing contacts connected to the common (terminal C). Contact with dual isolation from
the power supply (can also be used in SELV circuit).
• Type of load controllable using alternating current:
• Ohmic load (cosϕ 1): 2 A at 250 Vac - 5 A at 30 Vdc
• Incandescent load: 2 A at 250 Vac
• Inductive load (cosϕ 0,4): 1 A at 250 Vac
• 6 extractable terminals (inputs)
• 2 extractable terminals (power supply)
ENGLISH
30