Timing Setting - AVE 441016S Serie Instrucciones De Uso

1.1.4. TIMING SETTING

WARNING:
Respect the minimum timing times.
On/Off command
Roller shutter control
Once the third programming step has been selected using P1, the LED for the first non bistable zone
switches on (in the case of roller shutter control, the two LEDs switch on simultaneously). These LEDs will
be orange for the zones for which timing is already associated, and blue in the others. Unlike the other
programming steps, the relays are activated, to allow correct setting of the timing with the load connected.
If we then return to the settings done so far (see previous paragraph), column 1 (programmed as roller
shutter) is presented first.
Keeping your finger on the zone for a time T, associates that time to the zone.
20 seconds min
5 seconds min
10 minutes max
90 seconds max
ENGLISH
40