UTC Fire & Security Interlogix ZeroWire ZW-6404 Manual De Instalación página 79

1. Click More on the bottom of the screen.
2. Click Settings.
3. Select Scenes under Settings Selector.
4. Select the Scene to Configure and type a Scene Name.
5. Select the Scene Trigger.
6. Select Alarm System under Action Device.
7. Select Trigger Camera Video Clip under Action Type.
8. Select the Camera(s) which will record when the scene is triggered.
9. Clips are recorded on the Micro SD card installed in the camera and are linked to
events in History.
Viewing event triggered clips in History
1. Click the More tab on bottom of the screen.
2. Click History.
3. Find the video event you wish to view using the navigation buttons.
Manual de instalación de ZeroWire 77