Ventilation Menu (Function Present Only For Ducted And Ventilated Models) - Ravelli Touch Radio Manual De Instrucciones

The value can vary from -10°C to 10°C.
The standard value is 0°C.
Rev.0 17/05/2021
EN
Pag.30
VENTILATION menu (function only for models in which the same is specified in the dedicate user's manual)
The stoves equipped with ventilation system can heat the area in which are installed through the heat generated by the window and

Ventilation menu (function present only for ducted and ventilated models)

the room temperature fan installed inside them.
The stoves with optional fan use the natural convection system which guarantees a considerable amount of heat in the room with the
total absence of noise from the room ventilation. There is however the possibility, by accessing the menu below, to activate the optional
Below are the messages shown on display when the stove is equipped with ventilation system.
ventilation according to the power you require.
Below are the steps to follow, starting from the Home screen, to access the relative menu. The temperature read by the handheld unit controls the modulation of the stove. If you want to adjust the ventilation by
adjusting the stove, set the fan to A mode as shown in the relative chapter.
Press the key
"access menu" to
access the
MENU page
To exit the page and return to Home page, press the button repeatedly.
To exit the page and return to Stand-by page, press the button repeatedly.
Control: ventilation can be set from 0 to AUTO where 0 indicates that the same is disabled, setting from MIN to MAX enables selecting
the heat distribution speed. If set to AUTO, the ventilation follows the power set on the stove.
��
Chrono function
If the AUTO function is not set, the fan is released from the stove's power, except when the flame passes in modulation,
By enabling the chrono function, it is possible to control the ventilation speed for each program as shown in the logic above.
where the exchanger goes to minimum.
MANUFACTURER'S
TECHNICIAN
Press the key
"access menu" to
access the
MENU page
Use and maintenance manual Phandheld Touch Radio
MENU
USER
MANUFACTURER'S
TECHNICIAN
VENTILATION POW.
MENU
USER
Press the key
"confirm"
to access the
USER page
USER
POWER SETTING
CHRONOTHERMOSTAT
SCREW LOADING
SET AIR-PELLET
Press the key
"confirm"
to access the
USER page
Press the increase/decrease keys
"increase/decrease"
to change the ventilation.
USER
POWER SETTING
CHRONOTHERMOSTAT
SCREW LOADING
SET AIR-PELLET
CRONO-THERMOSTAT.
Press the key
"confirm"
to quickly switch to
VENTILATION.
USER
POWER SETTING
CHRONOTHERMOSTAT
SCREW LOADING
SET AIR-PELLET
Press the key
several times
to quickly switch to