EN
USE AND MAINTENANCE
LIFE
The helmet's life depends on various factors that cause deterioration, including sudden temperature changes, the
degree to which it is exposed to sunlight and the intensity of us. Inspect the helmet regularly to check for any
damage! Cracks, detached parts, warping, flaking and changes in color are significant elements for verifying the
helmet's state of deterioration; in any case we advise to replace the helmet after approximately 5 years because
over time its capacity for protection decreases due to the aging of the material. The manufacturing date is shown
on the inside of the helmet.
TRANSPORT
Given the type of device (helmet), no particular instructions are necessary for its transport there are no particular
cares for the transport.
INSTRUCTIONS FOR USE
CORRECT POSITIONING OF THE HELMET
The helmet must be correctly worn so that it can protect the forehead without impeding any visibility (Pic. 1 A).
Do not wear the helmet tilted too much toward to the back leaving the forehead exposed (Pic. 1 A). After
adjusting the helmet, it must stay locked onto the head without rotating even laterally (Pic. 1 B)
IMPORTANT: All adjustments made to the helmet in the following paragraphs of this manual should be
made while helmet is worn correctly; otherwise, the helmet may be improperly fitted. Adjustment in the
correct position allows the helmet to remain completely immobile during an accident.