Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
User Manual
Tower fan
6
Function keys and status indicators
The fan has 5 function keys and 10 status indicators.
When a status indicator lights up in blue, the function
is active.
The following table explains the function keys and sta-
tus indicators.
Designation
Description
ON/OFF
Press the key to switch the fan on or off.
Press the key to turn the oscillation function on or off. When the
OSC
oscillation function is turned on, the fan body moves back and forth.
Press the key to activate the timer function. Press the key again to
extend the duration of the timer function. You can set the timer func-
tion at half an hour intervals (0.5h, 1h, 1.5h, 2h, 2.5h, 3h, 3.5h, 4h,
4.5h, 5h, 5.5h, 6h, 6.5h, 7h, 7.5h).
TIMER
After the set time has expired, the fan switches itself off.
To end the timer function, press the key until all status displays for
the timer (4H, 2H, 1H, 0.5 H) have gone out.
Press the key to set the desired power level. You can choose bet-
SPEED
ween the LOW, MED and HIGH levels.
Press the key to set the desired mode. You can choose between
Standard, SLEEP and NATURAL modes.
MODE
When you turn on the fan, the Standard mode is preset and none of
the mode status indicators are lit.
Status indicators
When the status indicator lights in blue, the oscillation function is
OSC
enabled.
When one of the status indicators is lit in blue, the timer function is
4H, 2H, 1H,
active for the specified time. If several of the status indicators are lit,
0.5 H
the timer function is active for the total time.
If the status indicator is lit, the power level is set to LOW. The fan
LOW
produces light wind.
When the status indicator is lit, the power level MED is set. The fan
MED
produces medium wind.
When the status indicator is lit, the power level is set to HIGH. The
HIGH
fan produces powerful wind.
When the status indicator is lit, SLEEP mode is set. The fan runs a
SLEEP
program of different fan speeds.
When the status indicator is lit, the mode NATURAL set. The fan
NATURAL
runs a programme of different fan speeds.
If none of the mode status indicators are lit, the Standard mode is
Standard
active. The fan produces even wind at the set power level.
7
Remote control
7.1 Activating the remote control
Pull the contact protector out of the battery compartment (8).
The remote control is now activated.
7.2 Operating elements
Alternatively, you can control the fan using the remote control.
The following table describes the function of the buttons on the re-
mote control.
No. Designation
Description
1
OFF
Press the key to turn off the fan.
2
ON/SPEED
Press the button to turn on the fan and select the power level.
3
MODE
Press the key to set the desired mode.
Press the key to activate the timer function. Press the key again
4
TIMER
to extend the duration of the timer function.
5
OSC
Press the key to turn the oscillation function on or off.
7.3 Changing the battery
If necessary, replace the empty battery with a new one of the same type. See chapter 2.3
"Specifications".
1. Open the battery compartment (8) by pushing the small lever to the side and then
pulling the battery compartment out.
2. Remove the empty battery.
REV2021-02-03
V1.1aw
Subject to change without notice.
Function keys
3. Place the new battery in the battery compartment with the positive pole facing up-
wards.
4. Slide the battery compartment back closed.
5. Dispose of the empty battery properly.
See also chapter 10.2.
8
Connection and operation
During operation, place the product on a stable, level, dry and dust-free surface so that it
cannot tip over during operation and the floor covering cannot be damaged by vibrations.
Make sure that the power cable is laid in such a way that it does not obstruct anyone and
is not damaged.
1. Connect the mains cable of the fan to a free and easily accessible socket.
2. Turn the front of the fan in the direction you want to ventilate.
The fan is now ready for operation.
3. Use the function keys (1) or the remote control (4) to set the power level, mode
and timer function.
4. Switch the fan off after use.
9
Maintenance, Care, Storage and Transportation
The product is maintenance-free.
NOTICE!
Material damage
•
Only use a dry and soft cloth for cleaning.
•
Do not use detergents or chemicals.
•
Store the product out the reach of children and in a dry and dust-protected am-
bience when not in use.
•
Store cool and dry.
•
Keep and use the original packaging for transport.
•
Maintenance and repair work should only be carried out by qualified personnel.
•
Regularly check the tightness of the screws.
•
Do not overtighten the screws.
The threads can be damaged.
10 Disposal instructions
10.1 Product
According to the European WEEE directive, electrical and electronic equipment
must not be disposed with consumers waste. Its components must be recycled or
disposed apart from each other. Otherwise contaminative and hazardous
substances can damage the health and pollute the environment.
As a consumer, you are committed by law to dispose electrical and electronic devices to
the producer, the dealer, or public collecting points at the end of the devices lifetime for
free. Particulars are regulated in national right. The symbol on the product, in the user
manual, or at the packaging alludes to these terms. With this kind of waste separation,
application, and waste disposal of used devices you achieve an important share to
environmental protection.
WEEE No: 82898622
10.2 Batteries
Batteries must not be disposed of with household waste. Their components have
to be supplied separately to the recycling or disposal, because toxic and
dangerous ingredients can harm the environment if not disposed of sustainably.
As a consumer, you are obliged to return them at the end of their service lives to
the manufacturer, the sales outlet or established for this purpose, public collection points
for free. Details regulates the respective country's law. The symbol on the product, the
instruction manual and / or the packaging draws attention to those provisions. With this
kind of material separation, recovery and disposal of waste (rechargeable) batteries you
make an important contribution to protecting our environment.
D-34000-1998-0099
10.3 Packaging
Packaging can be disposed of free of charge at the suitable collection points – pa-
per belongs in paper bins, plastics belong in yellow sacks and glass belongs in
used glass bins.
DE4535302615620
11 EU Declaration of conformity
With the CE sign Goobay®, a registered trademark of the Wentronic GmbH
ensures, that the product is conformed to the basic European standards and
directives.
12 Symbols used
For indoor use only
Recycling
Alternating current
Direct current
- 4 -
IEC 60417- 5957
ISO 7001 - PI PF 066
IEC 60417- 5032
IEC 60417- 5031
by Wentronic GmbH | Pillmanstraße 12
38112 Braunschweig | Germany
52718
Goobay®
Publicidad
Tabla de contenido
