Introduction; Precautions, Requirements And Recommendations; Precautions To Avoid Possible Exposure To Excessive Microwave Energy - ENBIO Microjet Manual De Uso

1. INTRODUcTION.

1.1. Precautions, requirements and recommendations

the present documentation has to be read carefully, as the assem-
blage and usage of the device according to the descriptions contained
therein and following all safety requirements are the principles of the
appropriate and safe operation of the instrument. any use contradictory
to this instruction may cause accidents with serious consequences. un-
authorized personnel should have limited access to the device, while the
manning personnel should be properly trained. the term manning per-
sonnel refers to people, who, as the result of completed training, personal
experience and knowledge of important standards, documentation and
provisions concerning safety and working conditions, have been author-
ized to carry out necessary activities and are able to recognize potential
hazards and avoid them. this technical documentation has to be delivered
together with the equipment. the documentation contains information
concerning assembly and installation, as well as start-up, operation, repair
and maintenance of the device. Providing that the device is operated con-
forming to its intended use, this documentation contains sufficient instruc-
tions, essential for the qualified personnel. the documentation should be
located close to the device to be readily available to the service team. the
manufacturer reserves the right to introduce changes to the instruction as
well as changes to the device that affect its operation without prior notice.
enbio technology sp. z o.o. shall bear no responsibility for ongoing main-
tenance, inspections, programming of equipment and damage, caused
by standstills related to awaiting for warranty services, any damage to the
client's property other than the device in question, neither malfunctions
resulting from incorrect installation or improper use of the device.
1.2. Precautions to avoid possible exposure to excessive microwave
energy
15
Failure to observe the following safety precautions may result in
harmful exposure to microwave energy.
• Under no circumstances should attempt be made to operate the device
with the cover open or to tamper with the safety locks (lid latches) nor
insert any object into the lock holes.
• DO NOT insert any object between the cover of process chamber and
the chamber case or allow deposits of e.g. cleaning agent residues to
accumulate on sealing surfaces. ensure that the device cover and cover
sealing surfaces are clean by wiping after use with a damp cloth, and then
with a soft dry cloth.
• DO NOT operate the device if it is malfunctioning until it has been re-
paired by a qualified service technician trained by the manufacturer.
• DO NOT start the sterilization programme with the empty chamber.
Particular attention has to be paid if the cover of the process chamber clos-
es properly and there is no damage to the:
• lid (should not be bent);
• lid seals and sealing surfaces.
the device should be regulated or repaired solely by a qualified service
technician adequately trained by the manufacturer.
This product is a Group 2 Class B ISM equipment. The definition of Group
2 devices comprises all ISM equipment in which energy of radio-fre-
quency is intentionally generated and/or used in the form of electro-
magnetic radiation for the material processing, and EDM-processing
and arc welding.
Being the Class B appliance the sterilizer is suitable for domestic use and
in establishments with direct connection to low voltage power supply
network in residential constructions.