Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Slide nozzle forward to adjust spray to low pressure
mode (Figure 6). Slide nozzle backward to achieve high
pressure.
Figure 6 — Adjusting Nozzle for Pressure
Slide nozzle backward
for High Pressure
Mode
2.
Point nozzle towards a firm surface and press trigger
to test spray pattern (Figure 7).
Figure 7 — Testing the Spray Pattern
3.
Twisting nozzle adjusts spray pattern from a narrow
pattern to a fan pattern (Figure 8).
Figure 8 — Adjusting the Nozzle for Spray Pattern
Rotate nozzle
counterclockwise for fan
spray pattern
Generac Portable Products 1950 PSI Pressure Washer
Slide nozzle forward for low
pressure mode and
detergent application
Rotate nozzle clockwise
for narrow spray pattern
4.
For most effective cleaning, keep spray nozzle between
8 to 24 inches away from cleaning surface.
5.
If spray nozzle is held too close to surface, especially
using high pressure mode, damage to surface may
occur.
6.
DO NOT get closer than 6 inches when cleaning tires.
Using the Turbo Nozzle
The turbo nozzle rotates the high pressure stream in a
rapid circular pattern.The high pressure spray is most
effective when the tip of the nozzle extension is held
between 8 to 24 inches from the surface being cleaned.
CAUTION
The turbo nozzle produces an extremely high pressure
spray which is capable of removing paint and cutting
holes through surfaces if held too close.
• Always make sure the surface you will clean will not be
damaged by the high pressure spray by testing in a hidden area.
To attach the turbo nozzle to the spray gun:
1.
Engage safety latch to spray gun trigger.
2.
Remove the nozzle extension from the spray gun, if
attached.
3.
Attach the turbo nozzle extension to spray gun
(Figure 9).Tighten by hand.
Figure 9 — Connect Turbo Nozzle Extension to Spray Gun
4.
Disengage safety latch to spray gun trigger.
5.
Always start the turbo nozzle at a distance, gradually
getting closer to the surface until you get the cleaning
force you want.
NOTE: Detergent cannot be applied with turbo nozzle.
9
Publicidad
Capítulos
Tabla de contenido
