Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
IMPORTANT: Read entire owner's manual before you
attempt to assemble or operate your new pressure washer.
Remove Pressure Washer From
Carton
• Remove the parts bag, accessories, and inserts included
with pressure washer.
• Slice two corners at the end of carton from top to
bottom so the panel can be folded down flat.
• Remove pressure washer from carton.
Carton Contents
Items in the carton include:
•
Main Unit
•
Goggles
•
High Pressure Hose
•
Spray Gun
•
Adjustable Nozzle Extension
•
Turbo Nozzle Extension
•
Oil Bottle
•
Parts Bag (which includes the following):
•
Maintenance Kit
•
Owner's Manual
•
Engine Manual
•
Owner's Registration Card
If any of the above parts are missing or damaged, call the
pressure washer helpline at 1–800–270–1408.
Generac Portable Products 1950 PSI Pressure Washer
PREPARING PRESSURE
To prepare your pressure washer for operation, you
will need to perform these tasks:
1.
2.
3.
4.
5.
6.
Add Engine Oil and Fuel
• Place pressure washer on a level surface.
• Refer to engine owner's manual and follow oil and fuel
NOTE: Check oil often during engine break–in. Refer to
engine owner's manual for recommendations.
6
WASHER FOR USE
Fill out and send in registration card.
Add oil to engine crankcase.
Add fuel to fuel tank.
Connect high pressure hose to spray gun and pump.
Connect water supply to pump.
Attach nozzle extension to spray gun.
CAUTION
Any attempt to crank or start the engine before it has
been properly filled with the recommended oil will result
in equipment failure.
• Refer to engine manual for oil and fuel fill information.
• Damage to equipment resulting from failure to follow this
instruction will void warranty.
recommendations and instructions.
Publicidad
Capítulos
Tabla de contenido
