Recommended Tools; Adjusting The Belt - Manta MES001K Manual De Usuario

For brakes that are adjusted too tight:
Loosen the tension screw on the rear brake hub by rotating it clockwise until the wheel
spins freely.
For brakes that are adjusted too loose:
Tighten the tension screw on the rear brake hub by rotating it counter-clockwise until the
wheel has a slight drag.
Squeaky Brakes
The brakes may squeak before they are broken in. This is normal and will not affect the
function or performance of the brakes. With continued use the squeak should go away.
TIRE AND WHEELS
The electric scooter is equipped with resin tires. To avoid un-necessary damage to the rear
tire, do not apply the brakes when going full speed allowing the rear tire to lock up and
drag as it will cause uneven wear on the rear tire and is not covered under warranty when
abused in this manner.
Replacement tires can be obtained at your local dealer, through motorcycle shops.
MAINTENANCE

RECOMMENDED TOOLS

To adjust and service the electric scooter you will need the following tools:
⹅ Allen Wrenches: 3/4/5/6 mm
⹅ Wrenches: 8/10/13 mm Open end wrench
⹅ Large Adjustable Crescent Wrench
⹅ Philips Head Screwdrivers
⹅ Oil, Grease or Lubricant

ADJUSTING THE BELT

The belt will come adjusted from the factory. However, it may be necessary to adjust the
belt from time to time. The belt must be well aligned onto the sprockets in order to avoid
uneven wear. This will result in shortened belt life.
MES001K – EN
14