To tighten the belt:
vLoosen the nuts on each side of the rear axle and rotate the tension washer directly under
the nut in the desired direction to either tighten or loosen the belt tension. When the
desired tension has been obtained, simply tighten the nuts on each side of the axle.
MAINTENANCE SCHEDULE
Proper care of your scooter will insure optimal performance and longer life span. The
following are a few maintenance suggestions that will keep your electric scooter running
in top condition:
Daily Maintenance
Perform each time you ride your scooter
⹅ Clean the exterior of the unit with a soft, damp rag.
⹅ Check that all nuts and bolts are securely tightened.
⹅ Check battery charger for any frayed/cut wires.
MES001K – EN
How tight should the belt be?
⹅
If the belt is skipping or jumping on the sprockets, this is
too loose and may be harmful.
⹅
The correct tension is achieved by adjusting the belt
from its loose position to when it becomes lightly tense.
⹅
Adjusting the belt too tight may cause the belt to break
15