WARNING:
spark plug wire when making repairs ex-
cept for carburetor adjustments. Be-
cause a chain saw is a high-speed
wood-cutting tool, special precautions
must be observed to reduce the risk of
accidents. Careless or improper use of
this tool can cause serious injury.
PLAN AHEAD
• Restrict the use of your saw to adult
users who understand and can follow
safety rules, precautions, and operat-
ing instructions found in this manual.
Hearing
Protection
Snug
Fitting
Clothing
Safety
Shoes
• Wear protective gear. Always use
steel-toed safety footwear with non-
slip soles; snug-fitting clothing; safety
chaps; heavy-duty, non-slip gloves;
eye protection such as non-fogging,
vented goggles or face screen; an
approved safety hard hat; and sound
barriers (ear plugs or mufflers) to
protect your hearing. Regular users
should have hearing checked regu-
larly as chain saw noise can damage
hearing.
• Secure hair above shoulder length. Do
not wear loose clothing or jewelry; they
can get caught in moving parts.
• Keep all parts of your body away from
the chain when the engine is running.
• Keep children, bystanders, and ani-
mals a minimum of 30 feet (10 me-
ters) away from the work area when
starting and using the saw.
• Do not handle or operate a chain saw
when you are fatigued, ill, or upset, or
if you have taken alcohol, drugs, or
medication. You must be in good
physical condition and mentally alert.
If you have any condition that might be
aggravated by strenuous work, check
with doctor before operating.
SAFETY RULES
Always disconnect
Safety Hat
Eye
Protection
Heavy Duty
Gloves
Safety Chaps
• Do not start cutting until you have a
clear work area, secure footing, and,
if you are felling trees, a planned re-
treat path.
OPERATE YOUR SAW SAFELY
• Do not operate a chain saw with one
hand. Serious injury to the operator,
helpers, bystanders or any combina-
tion of these persons may result from
one-handed operation. A chain saw
is intended for two-handed use.
• Operate the chain saw only in a well-
ventilated outdoor area.
• Do not operate saw from a ladder or
in a tree.
• Make sure the chain will not make
contact with any object while starting
the engine. Never try to start the saw
when the guide bar is in a cut.
• Do not put pressure on the saw at
the end of the cut. Applying pressure
can cause you to lose control when
the cut is completed.
• Stop engine before setting saw down.
• Hand carry saw only when engine is
stopped. Carry with muffler away
from body; guide bar and chain proj-
ecting behind you; guide bar covered
with a scabbard.
• Do not operate a chain saw that is
damaged, improperly adjusted, or
not completely and securely as-
sembled. Always replace bar, chain,
hand guard, or chain brake immedi-
ately if it becomes damaged, broken
or is otherwise removed.
MAINTAIN YOUR SAW IN GOOD
WORKING ORDER
WARNING:
spark plug before performing mainte-
nance except carburetor adjustments.
• Have all chain saw service performed
by a qualified service dealer with the
exception of the items listed in the
MAINTENANCE
• Make certain the saw chain stops
moving when the throttle trigger is
released. For correction, refer to
CARBURETOR ADJUSTMENT.
• Keep the handles dry, clean, and
free from oil or fuel mixture.
• Keep caps and fasteners securely
tightened.
• Nonconforming replacement compo-
nents or the removal of safety devices
may cause damage to the unit and
4
Disconnect the
section of this manual.