Assembly; Carton Contents; Operation - Craftsman 358.350982 Manual Del Operador

STANDARDS: This saw is tested in ac-
cordance with American National Stan-
dards for Gasoline-Powered Chain
WARNING:
saw, ensure all fasteners are secure.

CARTON CONTENTS

Check carton contents against the fol-
lowing list.
Model 358.350982
• Chain Saw (fully assembled)
• 2-cycle Engine Oil
• Carrying Case
Examine parts for damage. Do not use
damaged parts.
KNOW YOUR CHAIN SAW
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
Compare the illustrations with your unit to familiarize yourself with the
CHAIN SAW.
location of the various controls and adjustments. Save this manual for future ref-
erence.
Front Hand Guard/
Chain Brake
Chain
Bar
Sprocket
Hole
Cylinder Cover
Throttle
Lockout
Rear
Handle
Throttle
Trigger
Chain Adjustment Tool
(Bar Tool)
ON/STOP SWITCH
The
ON/STOP SWITCH
the engine.

ASSEMBLY

Before using chain

OPERATION

Muffler
Bar Oil Fill Cap
Starter Housing
Air Filter Cover
Clutch Cover
Bar Nuts
is used to stop
Saws Safety Requirements (ANSI
B175.1-2012).
If you need assistance or find that parts
are missing or damaged, please call
1-800-235-5878.
NOTE: It is normal to hear the fuel filter
rattle in an empty fuel tank.
Your unit has been factory tested and
the carburetor precisely adjusted. As a
result you may smell gasoline or find a
drop of oil/fuel residue on the muffler
when you unpack the unit.
ASSEMBLY
Your saw is fully assembled; no
assembly is necessary.
Front Handle
Starter Rope
Fuel Mix Fill Cap
Adjusting Screw
Chain
Catcher
THROTTLE TRIGGER
The
THROTTLE TRIGGER
engine speed.
8
ON/STOP
Choke/
Switch
Fast Idle
Lever
Primer Bulb
Chain
Direction
of Travel
Guide Bar
controls