Intended Use - DeWalt DWE4606 Manual De Instrucciones

6” (150 mm) protección de ajustable de corte
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to
filter out microscopic particles.
• Avoid prolonged contact with dust from power sanding,
sawing, grinding, drilling, and other construction activities.
Wear protective clothing and wash exposed areas with
soap and water. Allowing dust to get into your mouth, eyes, or
lay on the skin may promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/or disperse dust,
which may cause serious and permanent respiratory or other injury.
Always use NIOSH/OSHA approved respiratory protection appropriate
for the dust exposure. Direct particles away from face and body.
WARNING: Always wear proper personal hearing protection
that conforms to ANSI S12.6 (S3.19) during use. Under some
conditions and duration of use, noise from this product may
contribute to hearing loss.
WARNING: Always use eye protection. All users and bystanders
must wear eye protection that conforms to ANSI Z87.1.
CAUTION: To reduce the risk of personal injury, use extra care
when working into a corner or edge because a sudden, sharp
movement of the tool may be experienced when the wheel or other
accessory contacts a secondary surface or a surface edge.
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
COMPONENTS (Fig. 1)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
FIG. 1
E
A
B
A. Guard opening adjustment
lever
B. Wheel change release
button
C. Guard stop screw

INTENDED USE

DWE4606 heavy-duty cut-off guard has been designed for professional
use at various work sites (i.e. construction sites) DO NOT use under
wet conditions or in presence of flammable liquids or gases.
This heavy-duty cut-off guard is a professional power tool accessory.
DO NOT let children come into contact with the tool. Supervision is
required when inexperienced operators use this tool.
5
F
D
C
D. Guard latch
E. Guard latch adjustment
screw
F. Outer guard

Publicidad

Tabla de contenido
loading

Tabla de contenido