Important Unpacking Instructions - Cuisinart Premier Serie Folleto De Instrucciones Y Recetas

IMPORTANT
UNPACKING
INSTRUCTIONS
This package contains a Cuisinart
Premier Series 11-Cup Food Processor, and
the standard parts for it: work bowl, work
bowl cover, large and small pushers, metal
chopping/mixing blade, slicing disc, shred-
ding disc, detachable disc stem for discs,
spatula, and recipe/instruction book.
CAUTION: THE CUTTING TOOLS HAVE
VERY SHARP EDGES. To avoid injury when
unpacking the parts, please follow these
instructions.
1. Place the box on a low table or on the
fl oor next to the kitchen counter or
table where you intend to keep the food
processor. Be sure the box is right side
up.
2. Remove the cardboard insert. You will
see a rectangular block of foam that
holds the processor parts, each fi tted
into a cavity in the foam.
3. The instruction/recipe book sits on the
top of bowl cover. Remove this fi rst.
4. The bowl cover (A) sits in the center of
the foam block. Remove this next.
5. The metal chopping blade (B) sits in the
cavity. Remove this next.
6. The slicing disc (C) is on the edge
of one of the long sides of the foam
block; the shredding disc (D) is on
the other side. Slide them out WITH
GREAT CARE; THE BLADES ARE VERY
SHARP.
7. Lift out the top foam block.
8. Lift out work bowl (E), large/small push-
ers (F), spatula (G) and detachable stem
(H) from the middle foam block.
9. Lift out the middle foam block.
10. Only the housing base (I) is at the bot-
®
tom of the box. Use both hands to lift
the base out of the box and place on
the table or counter.
11. Assemble the bowl onto the base by
positioning the handle to the left of
center and turning it counterclock-
wise to lock it into the base. Read the
instructions thoroughly before using the
machine.
12. Save the shipping cartons and foam
blocks. You will fi nd them very useful if
you need to repack the processor for
moving or other shipment.
NOTE: We recommend that you visit our
website, www.cuisinart.com, for a fast,
effi cient way to complete your product
registration.
WHEN REMOVING BLADE: CAREFULLY
REMOVE THE METAL BLADE BY GRASP-
ING THE CENTER WHITE HUB AND
LIFTING IT STRAIGHT UP. NEVER TOUCH
THE BLADES, AS THEY ARE RAZOR
SHARP.
2