Basic Procedure; Unpacking Space - Canon imagePROGRAF TZ-30000 Manual De Instalación

ENGLISH

Basic procedure

Take care when handling the printer as it is very heavy. Do not perform any
operations or procedures other than as described in this document and
instruction manual for this printer.
1
Taking Out the Accessories
Removing the Top Packaging
2
Material
3
Removing the Bag
4
Removing the Ramps
Removing the Bottom Packaging
5
Material
6
Lowering the Printer from the Pallet
7
Taking Out the Setup Guide

Unpacking Space

Make sure that you have sufficient space around the printer for installation.
The following diagram shows the minimum recommended space.
■
TZ-30000
Required space (W x D x H)
2
98.4 × 39.4 × 102.4 inches
Page
2,500 × 1,000 × 2,600 mm
2
Page
3
Page
3
Page
4
Page
39.4 inches
5
(1,000 mm)
Page
Warning
● Take care when handling the printer as it is very heavy.
6
● Do not perform any operations or procedures other than as
Page
described in this manual.
● When cutting the strapping bands, take great care because the
cut tips are sharp.
1
102.4 inches
(2,600 mm)
98.4 inches
(2,500 mm)