Troubleshooting - EarthWise PW15003 Manual Del Operario

Problem
Motor will not start
Motor stops suddenly
Unit does not reach high
pressure
Outlet pressure fluctuates
Detergent is not
dispensing
Low pressure
Unit will not stop when
trigger is released

TROUBLESHOOTING

Possible Cause

The switch is in the OFF position

Power cord not plugged in

Electrical outlet does not supply adequate
power

The trigger of the water gun is not engaged

GFCI plug not reset

Thermal safety switch has tripped due to
overheating

Water inlet filter is clogged

Not enough inlet water supply

Water supply is restricted

Pump is sucking air from connections or hoses

Pump is sucking air

Water inlet filter is clogged

Not enough water inlet supply

Nozzle is clogged with debris

Faucet not fully open or unit is not receiving a
full volume of water

Gun is malfunctioning

Turn switch ON

Plug in the power cord

Try another outlet

Engage the trigger of the water gun

Press reset button on GFCI plug

Check that the main voltage corresponds to
specifications

Clean the water inlet filter

Open water source full force

Check garden hose for kinks

Check that all supply connections are tight

Check that hoses and connections are air
tight. Turn off the machine and purge pump
by triggering the gun until you get a steady
flow of water.

Clean the water inlet filter

Open water source full force

Remove soap nozzle and clean with nozzle
cleaning pin.

Open the faucet all the way

Check garden hose for kinks

Clean the inlet filter

Disconnect unit from power source

Call customer service help line at
1-800-313-5111 for assistance
7
Possible Solution