Página 1
SOA-AVS1 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We’re ready to help!
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS Para instrucciones en Español, ver páginas 16-19 Before You Begin Please check the following items: Any accessories you plan to use do not exceed the specifi ed weight limit. The wall you chose to mount your shelf is wood stud, drywall, solid concrete, or concrete block.
Weight Limit Tools Needed 15 lb (6.8 kg) 7/16 in. (11 mm) DO NOT EXCEED! Tape Socket Measure Pencil Level Electric Drill Screwdriver Wrench Wood Stud Installations Features 1/8 in. 3 mm) Wood Can be mounted to drywall, wood stud, or concrete. Stud Finder Drill Bit Stackable to accommodate...
Página 4
Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
Attach the Wall Plate to the Wall STEP 1A Wood Stud Installation CAUTION: Avoid potential personal injuries and property damage! ● Drywall covering the wall must not exceed 16 mm (5/8 in.). ● Minimum wood stud size: common 51 x 102 mm (2 x 4 in.) nominal 38 x 89 mm (1½ x 3½ in.). IMPORTANT: For multiple-shelf stacking configurations, stack from the top down.
Página 7
STEP 1A Level the wall plate and mark the two middle hole locations. Drill pilot holes using a 3 mm (1/8 in.) diameter drill bit. IMPORTANT: Pilot holes must be drilled to a depth of 63.5 mm (2½ in.). Install using lag bolt and washer in the TOP hole and a wall screw in the BOTTOM hole.
Página 8
Attach the Wall Plate to the Wall STEP 1B Solid Concrete or Concrete Block Installation CAUTION: Avoid potential personal injuries and property damage! ● Mount the wall plate directly onto the concrete surface ● Minimum solid concrete thickness: 203mm (8 in.) ●...
Página 9
STEP 1B Drill pilot holes using a 10 mm (3/8 in.) diameter drill bit. IMPORTANT: Pilot holes must be drilled to a depth of 75 mm (3 in.). Never drill into the mortar between blocks. Insert anchor (concrete) in the TOP hole and a dry wall anchor in the BOTTOM hole.
Página 10
Attach the Wall Plate to the Wall STEP 1C Drywall Installation CAUTION: Avoid potential injuries or property damage! ● Mount the wall plate directly onto the wall. ● Drywall covering the wall must not exceed 13mm (1/2 in.). ● Do not install anchors into the seam between drywall pieces. IMPORTANT: For multiple-shelf stacking configurations, stack from the top down.
Página 11
STEP 1C Drill three pilot holes using a 10 mm (3/8 in.) diameter drill bit. IMPORTANT: Pilot holes MUST be drilled to a depth of 38 mm (1½ in.) Insert three dry wall anchors CAUTION: Be sure the anchors are seated flush with the surface. Install using three wall screws .
Página 12
Attach Glass Shelf to Wall Plate STEP 2 Slide the glass shelf into the wall plate . Line up the holes in the shelf with the holes in the wall plate as shown.
Página 13
STEP 2 Secure the glass shelf to the wall plate using screws Attach the safety plate to the glass shelf using screws...
Página 14
Manage Cables STEP 3 Single shelf confi guration Cables can be routed through the opening in the lower back of the wall plate When you are finsihed routing cables, replace the top (T) and front (F) covers.
Página 15
STEP 3 Stacked confi guration For stacked configurations, cables can be routed through the inside of the wall plates When you are finsihed routing cables, replace the top (T) and front (F) covers.
INSTRUCCIONES DE SEGURIDAD IMPORTANTES. ESPAÑOL LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO. CONSÉRVELAS Antes de comenzar Cerciórese de: que los accesorios que planifi ca usar no excedan el límite de peso especifi cado; que la pared escogida para el montaje de su repisa sea una pared de montantes de madera, yeso, hormigón sólido o bloques de cemento; haber leído y comprendido estas instrucciones;...
Piezas y elementos de sujeción suministrados ESPAÑOL ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;...
Página 18
ESPAÑOL PASO 1B Fijar la placa mural a la pared Opción para hormigón sólido o bloques de cemento PRECAUCIÓN: Evite posibles lesiones personales y daños materiales. ● Instale la placa mural directamente sobre la superficie de hormigón. ● Espesor mínimo del hormigón: 203 mm (8 pulgadas) ●...
ESPAÑOL Nivele la placa mural y marque la ubicación de los orifi cios. Retire las cubiertas frontal (F) y superior (T) de la placa mural Realice los orifi cios guía con una mecha de 10 mm (3/8 pulgada) de diámetro. IMPORTANTE: Los orifi...
Página 20
Thank you for choosing Sanus! Please take a moment to let us know how we did: Call us: 1-800-359-5520 Email us: info@sanus.com Leave a review: sanus.com UK: 0800 056 2853 Find us on Facebook: SANUS Follow us on Twitter @sanussystems Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.