Sanus SOA-AVS1 Manual De Instrucciones página 11

3. Drill three pilot holes using a 10 mm (3/8 in.) diameter drill bit.
IMPORTANT: Pilot holes MUST be drilled to a depth of 38 mm (1½ in.)
4. Insert three dry wall anchors
CAUTION:
Be sure the anchors are seated flush with the surface.
5. Install using three wall screws
CAUTION:
Improper use could reduce the holding power of the screw. DO NOT over-tighten the screws.
3
38 mm (1½ in.)
10 mm
(3/8 in.)
05
.
04 04
. Tighten the screws
4
only until they are pulled firmly against the wall plate
05
STEP 1C
01
.
5
04
01
11