Sanus SOA-AVS1 Manual De Instrucciones página 10

Attach the Wall Plate to the Wall
STEP 1C
Drywall Installation
CAUTION:
Avoid potential injuries or property damage!
●
Mount the wall plate
●
Drywall covering the wall must not exceed 13mm (1/2 in.).
●
Do not install anchors into the seam between drywall pieces.
IMPORTANT: For multiple-shelf stacking configurations, stack from the top down.
1. Verify a space BETWEEN any studs. Level the wall plate
2. Remove the front (F) and top (T) covers from the wall plate
1
10
01 directly onto the wall.
01
01 and mark the three hole locations.
01
.
2
(F)
(T)
01