Battery Installation/Replacement
1) Press down on tab and lift the cover.
2) Insert or replace 4 "AA" batteries into the compartment, matching the indicated
polarity symbols, Fig. 1.
3) To close, match up and connect the bottom
hooks of the cover, then push the top end.
NOTE: Replace the batteries when the Low Battery
symbol appears on the display or when the display
remains blank when the POWER button is pressed.
4) It is recommended to remove the batteries if the
unit will not be used for an extended period of
time.
AC Power Adapter (optional)
An AC adapter is available separately for battery-free operation. The AC adapter plugs
into the side of the unit as shown, Fig. 2. Please remember to practice electrical safety
precautions while using the adapter.
AC Adapter
Output: 6V DC 600mA
Applying Your Blood Pressure Cuff
Fig. 1
AC Adapter Connection
Fig. 2
– 10 –
Setting the Date/Time
NOTE: When the unit is off, the date and time will still appear at the top of the screen.
1. When the unit is off, press and release both the POWER and MEMORY button at the
same time. The month will begin to flash, Fig. 1.
2. Press the MEMORY button to change until the desired
number appears.
NOTE: To scroll through the numbers quicker, hold down the
MEMORY button.
3. Press the POWER button to set the entry.
4. The date, Fig. 2, followed by the hour and minutes will
blink. Repeat steps 2 and 3 to adjust the date/time setting.
5. After setting the minutes, the unit will automatically exit out of
the date/time setting mode, Fig. 3.
NOTE: The time is expressed in 24hr military time. The chart below
explains the time conversion.
Regular Time
Military Time
Regular Time
(12 hours)
(24 hours)
(12 hours)
12 am
12 pm
0
Midnight
1 am
1
2 am
2
3 am
3
4 am
4
5 am
5
6 am
6
7 am
7
8 am
8
9 am
9
10 am
10
10 pm
11 am
11
11 pm
Fig. 1
Military Time
(24 hours)
12
Noon
1 pm
13
Fig. 2
2 pm
14
3 pm
15
4 pm
16
5 pm
17
6 pm
18
7 pm
19
8 pm
20
9 pm
21
22
23
Fig. 3
– 11 –