Toto ZA TLP03301U Manual De Instalación Y Del Propietario página 6

4. Screw Part B from the bottom of
the lavatory into Part A, turn the
nut until the upper end of Part B
is secured to the lavatory.
*Please don't forget the gasket in
the middle of Part B.
5. After the nut of Part C is aligned
with the lower end thread of Part
A, turn the nut in Part C until it is
tightened.
6. Connecting part installation (as
shown in the figure)
a. User shall buckle the wire head
of the drain assembly into the
bottom of the lifting guide
sleeve.
b. Until it clicks.
Note: Do not push it with force
to avoid any damage.
INSTALLATION PROCEDURE
6
B
C
Lifting
guide sleeve
Wire head
Click