Toto ZA TLP03301U Manual De Instalación Y Del Propietario página 7

7. Press the drain lift rod until it clicks.
*Check if it is well installed:
Press down the drain lift rod and the
cover part will pop up, then pull up the
drain lift rod again and the cover part will
close to stop the water.
Note: Do not press it with force to
avoid any damage.
8. *The minimum bending radius of the
drain rubber wire is R1-3/16" (30 mm).
Note: The plunger is removable.
INSTALLATION PROCEDURE
The minimum bending
radius is R1-3/16" (30 mm)
7
Click