How To Use Accessory Tray; Low Pressure; High Pressure - Craftsman 580.752710 Instrucciones De Uso

How to Use Accessory Tray

The unit is equipped with an accessory tray with
places to store your ProjectPro™ nozzles, spray gun
and nozzle extension.
NOTE: The extra hole in the tray is for storing a utility
brush. The extra clip in the tray is for storing a turbo
nozzle. The brush and turbo nozzle are NOT included
with your pressure washer. You can buy these items
as optional accessories.
1. Place nozzle extension through hole on accessory
tray, as shown.
2. Place spray gun through hole on accessory tray
on right side of unit.
3. Insert multi–colored ProjectPro™ nozzles in
spaces provided in accessory tray.
How to Use ProjectPro™ Nozzle System
The quick–connect on the nozzle extension allows you
to switch between four different ProjectPro™ system
nozzles. The ProjectPro™ nozzles vary the pressure
and spray pattern as shown.

High Pressure

Delicate General
40° Yellow 15° Orange
2350 PSI 2800 PSI
2.7 GPM 2.5 GPM
Low
Pressure
Black
Use to apply
detergent
Max
0° Red
2900 PSI
2.3 GPM
Follow these instructions to change ProjectPro™
nozzles:
1. Engage trigger lock on spray gun.
CAUTION
A pressure washer produces a high pressure spray
which increases risk of injury and damage to unit.
• NEVER exchange ProjectPro™ nozzles without locking
the trigger lock on the trigger.
• DO NOT twist ProjectPro™ nozzles while spraying.
2. Pull back collar on quick–connect and pull current
ProjectPro™ nozzle off. Store ProjectPro™
nozzles in holder provided on the accessory tray.
3. Select desired ProjectPro™ nozzle:
• For delicate rinse (lower pressure and higher
flow), for gentle cleaning of cars/trucks, boats,
RV's, patio furniture, lawn equipment, etc.,
select yellow delicate ProjectPro™ nozzle.
• For general rinsing (medium pressure and
medium flow), ideal for most all purpose cleaning
such as home siding, brick patios, wood decks,
driveways and sidewalks, garage floors, etc.,
select orange general ProjectPro™ nozzle.
12