Boundary Wire Basics; Pegging The Boundary Wire; Burying The Boundary Wire; Splicing The Boundary Wire - Worx Landroid M Manual Del Usuario

4.

Boundary Wire Basics

4.1 Pegging the Boundary Wire

Use the Boundary Wire Distance Gauge (24) to set the correct
distance from the border of your lawn (More than 14 in.*).
* This is the recommended distance. Use the provided distance
gauge to ensure proper installation.
If your neighbor also uses a Landroid
spacing of at least 20 in. between your Boundary Wire and your
neighbors.
The boundary wire must outline the intended mowing
area exactly. Your Landroid
bends or coils of Boundary Wire that are not part of its mowing area
( See Fig. H). If there is excess Boundary Wire after the mowing area
has been outlined, then cut it off and store this additional wire in a
separate location. However, it is important to leave the necessary
length where it connects to the Charging Base so it can be connected
and still remain buried.

4.2 Burying the Boundary Wire

If you are planning to bury the Boundary Wire then it should be
noted that when entering its Charging Base for the first time, your
®
Landroid M may find problems with the way you have laid the wire.
It is recommended to first peg down the Boundary Wire to the lawn
so it is easy to make adjustments if necessary. This will allow the
®
Landroid M to become adjusted to its new environment and ensures
it will successfully work with the charging base before the Boundary
Wire is buried.
12
NOTE: If you intend to bury the boundary wire, make sure to place the boundary wire at least 0.4
inches and a maximum of 2 inches into the ground.
When you have completed installing the boundary wire, it is recommended that you ask Landroid
wire by pressing the home button.
Whilst observing Landroid
trouble free tracking of the boundary wire by Landroid

4.3 Splicing The Boundary Wire

The Boundary Wire (21) can be extended simply by splicing the ends and connecting it to the ends of another piece of wire.
You can use electrical tape to secure the joined part of the wire. (See Fig. I)
5.

Software Update

®
Your Landroid M software can be updated when new versions become available. The software version will be displayed in
the diagnosis page by pressing button 2 on homepage. The latest software can be downloaded from our website
www.worx.com. See the detailed guideline on download page.
The manual in box is based on the default software in the mass production. Some new features/functions in the new
version may not exist in the manual. If you found some settings not in the manual, please visit www.worx.com to download
the latest manual.
6.

Maintenance

®
Your Landroid M needs to be checked from time to time. The Landroid
as well as having some parts replaced, as they can become worn.
In the following we want to let you know how to take care of your Landroid
Lawn Mowing Robot
®
M, then you must keep a
®
M will become confused by extra
®
M locating the charging station you can then make alterations to the boundary wire route to ensure
®
H
I
M when locating the charging station
®
M works hard and after time needs a good cleaning
®
M.
®
M to follow the boundary
EN