AneX Sport Manual De Uso página 13

STROLLER
ASSEMBLING / DISASSEMBLING.
Unbox this stroller's frame and put it horizontally on
the floor (fig. 1). Disable the lock against accidental
unfolding (fig. 2). Pull upwards vigorously till the
system is secured, while holding the handle (you
should hear a specific sound) (fig. 3, 4). To fold the
frame, press the red button located on the frame's
right lever. Then simultaneously pull the levers located
on both sides of the frame (fig. 5). Gently push the
frame down to the original position it had when you
were unpacking this stroller (fig. 1). This stroller
features a handle for carrying or transporting this
stroller's frame (fig. 6). For easy carrying or transporting
the frame turn the handle through 90° (fig. 7).
HANDLE HEIGHT ADJUSTMENT
Simultaneously press the round buttons, placed in
parallel on both sides of the handle. Set a comfortable
handle height for you (fig. 7).
WHEEL MOUNTING / DISMOUNTING
Before mounting a wheel, insert an axis pin, while
holding the red button (fig. 8). Release the button to
secure this axis pin (you should hear a specific sound);
To mount a wheel, press the wheel's center button,
then push it along the axis pin till it stops, release
the button and gently push until locking (fig. 9). To
dismount a wheel, press at its midpoint and pull along
the axis pin till it comes off completely (fig. 9). A wheel
is dismounted without the axis pin, but the axis pin can
be removed as well by pressing the red button (fig. 8).
FRONT SWIVEL WHEELS
DISMOUNTING AND LOCKING
This stroller's frame features two front swivel wheels
capable of rotating on their axis through 360°. To
dismount a front wheel, vertically press the button
located above this wheel. A wheel is dismounted
together with its axis pin (fig. 10). To secure the rotary
wheels system, turn the regulator located below the
button used for their dismounting (fig. 11).
BRAKE
This stroller features a parking brake blocking its rear
wheels (fig. 12). To stop this stroller, you must press
the pedal blocking rear wheels (fig. 12). To continue
moving along, you need to reset the pedal (fig. 12).
SHOCK ABSORPTION
This stroller features a spring shock absorption
and a frame-based adjustable shock absorption
mechanisms, ensuring your baby's comfort
(fig. 13, 14). To adjust the frame-based shock
absorption mechanism, turn both regulators (right and
left) in the same direction (fig. 14). The spring shock
absorption mechanism is regulated using a special
switch located under the shock absorber
(fig. 13). Always adjust both sides equally.
PORTABLE CRADLE
MOUNTING / DISMOUNTING
To mount the portable cradle, place the adapters into
the adapter pockets, located on the frame's inner side
PRE-USE PROCEDURES
(fig. 15). The portable cradle adapters are blocked
automatically; To dismount the portable cradle, press
the buttons of the portable cradle adapters, while
lifting it up (fig. 15). If necessary, the portable cradle's
inner part can be removed and washed (fig. 16, 17).
The portable cradle's backrest (covered by a coconut
mattress) can be adjusted till the desired height is
reached using a regulator located on the portable
cradle's bottom side (fig. 18).
PORTABLE CRADLE HOOD,
FEET COVER
The portable cradle features a convenient fol-
dable hood protecting a child from the elements
(wind, sun, snow, rain). The stroller's hood position is
adjusted with two buttons at its bottom (fig. 19).
The portable cradle features an additional handle for
easy carrying (fig. 20). The portable cradle features a
feet cover, which is put on in its forepart and secured
with a zipper and buttons on both sides (fig. 21).
The portable cradle's hood can be ventilated by
unfastening a zipper on the roof and untucking the
bottom part (fig. 22). This stroller features an insect
protection (fig. 23). This stroller features a rain
protection system matching both the portable cradle
and the seat unit (fig. 32, 33).
SEAT UNIT MOUNTING / DISMOUNTING
To mount the seat unit, place its adapters into the
adapter pockets located on the frame's inner side
(fig. 24). The seat unit's adapters are blocked
automatically; To dismount the seat unit, press the
buttons of the seat unit's adapters, while lifting it up
(fig. 24). The seat unit's backrest can be adjusted to
the desired height using the adjuster located on the
seat's backside (fig. 25).
SEAT UNIT HOOD, FEET COVER
The seat unit features a convenient foldable hood
protecting a child from the elements (wind, sun,
snow, rain). Hood position is adjusted by pressing on
its top (fig. 26). The seat unit features a feet cover,
which is secured with buttons on both sides in this
stroller's forepart (fig. 27). The seat unit's hood can
be ventilated by unfastening a zipper on the roof and
untucking the bottom part (fig. 27).
FOOTREST ADJUSTMENT
For adjusting to a desired height, simultaneously press
the buttons located in front of each other on both
sides of the footrest (fig. 28).
SEAT UNIT'S SECURITY BARRIER
Every seat unit features a security barrier with a
protective mechanism preventing a child from
getting out of this stroller. Simultaneously press the
red buttons, placed in parallel on both sides of the
handle, set a comfortable height for you (fig. 29). For
dismounting the security barrier, press the buttons and
gently pull the handle up (fig. 30). For mounting the
security barrier, insert it into the latching mechanisms
located on both sides of the seat unit (fig. 30).
EN
13