Switching The Device On And Off; Setting The Time And Date - AEG WE 4125 Instrucciones De Servicio

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30

Switching the Device on and Off

Switching on
Move the POWER ON/OFF switch (7) to the ON position. The currently selected frequency
will appear in the display.
Switching off
Move the POWER ON/OFF switch to the OFF position.

Setting the time and date

Setting the Time
1. Push the MODE button (2) six times. The hours and the display format are shown.
• A = AM (Morning, 12-hour display),
• P = PM (Afternoon,12-hour display),
• H = 24-hour display
2. Push the SET button (3), until the hour is programmed in the desired display format.
3. Push the MODE button for confirmation. The minutes are shown.
4. Set the minutes with the SET button.
5. Push the MODE button to confirm.
6. When the colon lights up, press the SET button once more to complete the entry. The
colon will flash and show the current time.
Setting the date
The date is linked to the time. As soon as the time is adjusted and the date line is thus
exceeded, the date is also automatically adjusted. We therefore recommend to first set the
time, and then the date.
1. Push the MODE button four times. The month is shown.
2. Set the month with the SET button.
3. Confirm your entry with the MODE button. The day is shown.
4. Set the day with the SET button. Press the MODE button three times to switch to
normal mode. The time is shown.
English
49

Publicidad

Tabla de contenido
loading

Tabla de contenido