Charging The Speaker - GZ electronics GZ-22 Guia Del Usuario

3D STEREO SOUND
While playing music, press "Vol+" and
"Vol-" button simultaneously. The music
will go silent for a second, and when the
3D STEREO SOUND is on, the LED indicator
will glow green.

Charging the Speaker

The red blinking of the LED indicates that
the battery is running low. As soon the
battery starts charging, the LED will start
to glow red solidly.
When the battery is fully charged, the LED
will go down.
Note: please, turn the speaker off or
set it to the standby mode (disconnect
Bluetooth and Aux cable) before charging.
7