Oki MJ-1107 Guia De Inicio Rapido página 14

5. (A) Adjust the height of the paper feed front
side.
1) Loosen the two screws [1].
2) Adjust the height by turning the adjustment
screw [2].
3) Tighten the two screws [1].
6. (B) Adjust the height of the paper feed rear
side.
1) Loosen the two screws [1].
2) Adjust the height by turning the adjustment
screw [2].
3) Tighten the two screws [1].
7. (C) Adjust the height of the paper exit front
side.
1) Loosen the two screws [1].
2) Adjust the height by turning the adjustment
screw [2].
3) Tighten the two screws [1].
© 2013 Oki Data Corporation. All rights reserved
( A )
[ 1 ]
( B )
[ 1 ]
[ 1 ]
14 / 16
[ 2 ]
[ 1 ]
[ 1 ]
[ 2 ]
( C )
[ 1 ]
MJ-1107 with KN-2550
45686244EE
[ 2 ]