Warning Labels; Machine Setup And Operation - Tennant V-WD-24P Manual Del Operador

EN

WARNING LABELS

The warning labels appear on the machine in
the location indicated. Replace labels if they
becomes damaged, illegible or if missing.
8 TENNANT V-WD-24P
MACHINE SETUP
OPERATION
1. Before operating, attach the cord restraint
to the handle and loop the extension cord
through the cord restraint as shown.
restraint hook to prevent risk of an
electrical hazard.
2. Inspect power cords for damage before
each use. Replace cords immediately if
damaged.
3. Connect the supplied extension cord into
a grounded 3 hole electrical outlet. No
adapter should be used with the machine.
Do not remove, bend or modify ground pin.
Do not use additional extension cords.
4. Connect the vacuum hose to the machine
it to the vacuum hose.
AND