Stiga Play The Best T8722 Manual Del Propietário página 2

1. Attach 5 Mounting Brackets (#7) to Connecting End Rail (#6) as
shown in Figure 1. Attach each Bracket (#7) with 1 bolt (#17)
and 1 Locknut (#18). IMPORTANT: Brackets must be attached
exactly as shown. Tighten nuts tight but do not overtighten
crushing tube.
2. Attach 2 Caster Assemblies (#9) to Connecting End Rail (#6) as
shown in Figure 2. Secure with Locknuts (#18). Tighten nuts
tight but do not overtighten crushing tube.
3. Repeat steps 1 – 2 on other Connecting End Rail (#6). Attach
parts to this 2nd Connecting End Rail exactly the same way as
the first Connecting End Rail you just completed.
For aid in identifying hardware, see hardware identifier on page 8.
17
7
17
6
7
18
6
2
17
7
17
7
18
18
Figure 1
18
Nut on this side Nut on this side
9 Figure 2
18
7
Nut on this
side
9