LG LSC27935 Serie Manual De Usuario página 30

Ocultar thumbs Ver también para LSC27935 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
• The ice dispenser is stalling while
dispensing "crushed" ice.
NOT DISPENSING
• Ice maker power switch in the OFF
ICE
(O) position.
• Water supply turned off or not
connected.
• The dispenser display is locked.
• New installation.
• Refrigerator or freezer doors are not
closed properly.
• Water supply turned off or not
connected.
• The water pressure is less than 40
NOT DISPENSING
PSI (0,27 MPa).
WATER
• Home filter or reverse osmosis
system is used.
• The dispenser is not set for water
dispensing.
TROUBLESHOOTING GUIDE
Possible Causes
28
Solutions
• Change the ice button from "crushed" to "cubed". If
cubed ice dispenses correctly, depress the button
for"crushed" ice and begin dispensing again.
• Move the switch to the ON (I) position.
• See the "Connecting the Water Line" section.
• Press and hold the Lock button for 3 seconds to
unlock the control panel and dispenser.
• Flush and fill the water system.
• Water will not dispense if any of the refrigerator
doors are left open.
• See the "Connecting the Water Line" section.
• The water pressure to the home affects the flow
from the dispenser.
• This
can
decrease
recommended not to connect the supply line to
a reverse osmosis system for optimal operation.
• The dispenser can be set for ice or water. Make
certain that the control panel is set for the proper
operation. Press the dispenser button on the
control panel to cycle through the ice and water
options.
water
pressure.
It
is

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Lsc27937 serie

Tabla de contenido