Best For Bistrot 364 / 12 Manual De Instruccion Para La Instalacion Y Uso página 35

Set the temperature by pressing the INCREASE
the desired temperature of 190% and wait for the TEMPERATURE/PROGRAMMES display (10) to stop
flashing
(the temperature will this way be set and the TEMPERATURE/PROGRAMMES display (10) will show again
the actual temperature in the cooking chamber
The HEATING ELEMENTS icon
that of the cooking chamber)
To set the time press the TIME button
display (9)) press the INCREASE
of 5 minutes and wait for the TIME/HUMIDITY display (9) to stop flashing (the time will be set)
Set the humidity by pressing the HUMIDITY button
TIME/HUMIDITY display (9)) press the INCREASE
the desired humidity value OFF (off, 20%, 40%, 60%, 80%, 100%) and wait till the TIME/HUMIDITY
display (9) stops flashing
At the end of the programming, press the PROGRAMMES
to save the programme.
On the TEMPERATURE/PROGRAMMES display (10) appears the number of the selected programme
and on the TIME/HUMIDITY display (9) appears MEM (memorised).
EXAMPLE OF COOKING IN PROGRAMME MODE
Turn the oven on with ON/OFF button
Press the PROGRAMMES
TEMPERATURE/PROGRAMMES display (10))
Choose the programme number with INCREASE
Press the START/STOP button
programme and the use of pre-heating).
will turn green to indicate that the set temperature is higher than
(it will make the message END flash on the TIME/HUMIDITY
or DECREASE
button (a
(cooking starts with the previously set parameters of the chosen
35
or DECREASE
buttons until you reach the desired time
(it will make the message OFF flash on the
or DECREASE
button until the buzzer rings in order
flashing P01 message
or DECREASE
buttons until you reach
buttons until you reach
appears on
buttons
the