TFA 35.1087 Instrucciones De Uso página 7

TFA_No_35.1087_Anl_06_21
Indoor weather station
B5: "DOWN" button
Housing
C1: Wall Mount Hole
C3: Stand (removable)
5. Operation
• Open the battery compartment and insert two batter-
ies 1.5 V AAA, polarity as illustrated. A short beep will
sound and all LCD segments will light up for about 2
seconds.
• The unit is now ready to use.
• By pressing the DOWN button the temperature unit
can be changed from °C to °F.
• To enter calendar mode, press MODE button. The date
is displayed.
• To enter alarm mode, press 2 x MODE button. The
alarm time is displayed.
6. Setting Mode
• Press MODE button for 2 sec. to enter the respective
setting mode and select all settings one after the other.
• When the digits are flashing set the desired time by
pressing the UP or DOWN button. Hold and press the
button for a fast count.
• The instrument will quit the setting mode, if there is
no button used within 10 seconds.
A. Setting of Time
Press MODE button (2 sec.)
Select Time Hours by pressing UP/DOWN button
Press MODE button
Select Time Minutes by pressing UP/DOWN button
Press MODE button
Exit setting mode
B. Setting of Calendar
Press MODE button
Enter Calendar mode
12
08.06.2021 16:08 Uhr
B6: "LIGHT" button
C2: Battery compartment
Seite 7
Indoor weather station
Press MODE button (2 sec.)
Select Date Year by pressing UP/DOWN button
Press MODE button
Select Date Month by pressing UP/DOWN button
Press MODE button
Select Date Year by pressing UP/DOWN button
Press MODE button (twice)
Exit setting mode
C. Setting of Alarm
Press 2 x MODE button
Enter Alarm mode
Press MODE button (2 sec.)
Select Alarm time Hours by pressing UP/DOWN button
Press MODE button
Select Alarm time Minutes by pressing UP/DOWN button
Press MODE button (twice)
Exit setting mode
7. Activate/turn off Alarm
• To activate/turn off the alarm function, press UP
button in alarm mode. The alarm symbol appears or
disappears on the current time display.
• Press any button to stop the alarm.
8. Snooze function
• Once the alarm starts to ring (backlight turns on
briefly), you can activate the snooze function by press-
ing the SNZ button. The alarm symbol flashes and the
alarm will be interrupted.
9. MAX/MIN values:
• Press the MAX/MIN button and the highest tempera-
ture and humidity values are displayed (MAX).
• Press the MAX/MIN button again, the display shows the
lowest values.
• There is an automatic daily reset of maximum and
minimum values (midnight 0:00).
13