Electrical Connection; Replacing The Electric Power Cable - Fagor SFA-8CE Manual De Instalación Y Utilizacion

Secadora de condensación
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
3 / INSTALLING YOUR TUMBLE DRYER

• ELECTRICAL CONNECTION

The dryer must be installed in accordance with all local codes or, in the absence of a local code :
— in the U.S.A., in accordance with the National Electric Code, ANSI/NFPA 70 - latest edition/State
and Municipal codes and/or local codes.
— in Canada, in accordance with the Canadianl Electric Code, C22.1 - latest edition/Provincial and
Municipal codes and/or local codes.
Danger :
To make the electrical connection to your appliance :
— Do not use an extension, an adapter, a multiple socket or a programmable timer.
— The plug must be easily accessible but be out of children's reach.
— If there's any doubt about the condition of your installation, contact your installer or a qualified
Brandt-approved professional.
— Never eliminate the electrical Earthing system.
The Dryer comes with a 16AWG Cord and NEMA 6-15P plug
It should be connected to a 240V, 15A, 60Hz AC 2 Phases + wire grounding power outlet (NEMA
6-15R) is necessary.
We cannot be held responsible for any incident caused by poor electrical installation.

• REPLACING THE ELECTRIC POWER CABLE

Important :
To ensure your safety, this must be carried out by the manufacturer's after-sales service
team or a qualified professional.
Advice :
In order to easily find your appliance's reference numbers in the future, we recommend
that you note them down on the "After-Sales Service and Consumer Relations" page (this page
also explains where to find these on your appliance).
Your appliance complies with UL 2158 (Electric clothes Dryer).
10

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sfa-8celx

Tabla de contenido