Direct Evacuation Of Water Condenser - Fagor SFA-8CE Manual De Instalación Y Utilizacion

Secadora de condensación
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
6 / USER-MAINTENANCE INSTRUCTIONS

• DIRECT EVACUATION OF WATER CONDENSER

To avoid having to empty the collection tank every
time you use the appliance, you have a kit (*) for
removing the water from the condenser directly into
the drain (hose and deflector). To fit this :
— Take off the existing pipe and push it inside the
appliance (Fig. 13).
— Clip the deflector with the top of the pump (Fig. 14).
— Connect the hose from the kit to the end connector
on the appliance (Fig. 15)
You can connect the other end of the hose either :
- To a ventilated trap (Fig. 16 ).
- Or a sink trap (Fig. 17) .
When connecting to a trap, you must remove the fil-
ler plug. Then press home the rubber tip. If neces-
sary, add a clamp connection (Fig. 17 ).
Important :
The deflector must be positioned before the
drain hose connection to avoid any water splashes
when taking off the hose.
Remarks :
(*) This kit is provided with the appliance
or is available near your After-sales service
under the ref. 57X3184 (according to model).
Insert
Encart
Hose
Tuyau
Deflector
Déflecteur
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
18

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sfa-8celx

Tabla de contenido