Technical Specifications; Description; Before Using For The First Time - FAR BSF R&B CI Manual Del Usuario

ENGLISH

TECHNICAL SPECIFICATIONS

• Nominal voltage
• Nominal power

DESCRIPTION

9
8
7
1. Lid
2. Lid button
3. Handle
4. Water gauge
5. On/Off switch
GB-8
220-240V 50/60Hz
1850-2200W
1
2
3
4
5
6
6. Power cord
7. Decorative ring
8. APPLIANCE
CASING
9. Filter

BEFORE USING FOR THE FIRST TIME

Before using for the first time, it is recommended
that you operate the kettle two or three times
following the instructions above to remove dust
and residues that may have been left during
production.
• Remove the kettle from the base before filling.
• To fill the kettle, open the lid by pushing the
lid button down, then fill to the desired level
(min. 0.5 L ~ max. 1.7 L), and close the lid by
lowering it until it slots into place.
• Plug the power cord into the power socket,
press the on/off switch down and the power-
on indicator will come on.
• Once the water has reached boiling point, the
kettle turns off automatically. You can stop the
heating process at any time by lifting the on/off
switch. The power-on indicator switches off.
ENGLISH
GB-9