MAURER 52604 Manual De Instrucciones página 21

How to install bag cutters：
5.
Disemble
Twist the cutter anticlockwise
approximately 100°（Pic.1）
1）
.Assemble
（Pic.1）
Assemble the knife and the cap.(Pic.1)
approximately 100°
NOTE: Once you have sealed 5 bags continuously, allow the appliance to cool down
for about 1 minute. During this cool-down phase, you cannot start the appliance. After
the cool-down phase, you can use the appliance as normal.
（Pic.1） （Pic.2）
Lift up the cap of cutter (Pic.2)
（Pic.2）
Twist the cap of cutter clockwise Pic.2)
①②
21