Getting Started - ACCO REXEL CB206 Guia Del Usuario

CB206_15_08_03_IM_ver3.qxd 15/08/2003

Getting Started

Safety Tips
Please read and retain these instructions for future reference.
➤ When punching, always ensure the machine is on a flat, stable
surface.
➤ Always test the machine with scrap paper before punching the final
document.
1. Unpacking and Setting Up
• Your machine is ready to use when removed from the box. Retain the
packaging in case you need to return the machine for repair.
• Position the machine on a flat stable surface.
• Lift the handle to the vertical position.
2. Selecting the Correct Plastic Comb
• Select the appropriate comb to suit the document size:
Comb size
5mm
6mm
8mm
9.5mm
12.5mm
14mm
16mm
The separate comb opening mechanism allows you to collate documents
on the comb whilst punching more pages. Giving you a quicker binding
cycle.
13:41 Page 1
Sheets
3/16" 2-15
1/4" 10-25
5/16" 20-40
3/8" 30-60
1/2" 50-90
9/16" 80-110
5/8" 100-140
➤ When punching PVC/PP covers, we recommend the cover be
punched with some paper either side.
➤ Do not punch metallic objects such as staples or paper clips.
➤ Empty the waste tray regularly.
3. Inserting and Opening the Comb
Close the 'comb operating mechanism' by turning the 'comb
•
operating knob' clockwise.
Place the plastic comb open side up on the comb opening
•
mechanism. [Fig. 1]
Open the comb by turning the 'comb operating knob' anti-clockwise.
•
4. Paper Edge Alignment
• Rotate the green knurled wheel to move the edge guide to the
required setting of A4, US letter or Cover. [Fig. 2]
5. Punching the Document
• Insert the sheets into the punching channel and align to the edge
guide and the rear of the channel. [Fig. 3]
• Support the machine and lower the raised handle to punch. [Fig. 4]
1
GB