Technical Specifications; General Characteristics; Electrical Connection - Pentair STA-RITE VSD Serie Manual De Instrucciones

EN
•
•
Use the packaging to return the product to the dealer in the event of a fault otherwise dispose of all packaging materials in accordance
with local regulations.
During storage, protect the product from moisture, dust, heat sources, mechanical damage and external contamination in order to
CLASSIFICATION AND TYPE.

GENERAL CHARACTERISTICS

•
•
•
•
•
•
• Internal pressure transducer.
•
minimum level detector. For its connection see Fig.5a for VSD 6 M/T and 10 M/T or Fig.5b VSD 9 T/T and 14 T/T.
•
•
•
•
•
14

TECHNICAL SPECIFICATIONS

TYPE VSD 6 M/T VSD 10 M/T
Input voltage 1~230Vca+-20% 1~230Vca+-20%
Frequency
Max current per phase 6A (3~230V) 10A (3~230V)
Inrush current 20% per 10s 20% per 10s
Maximum operating +16bar +16bar
pressure
Adjustable pressure 0,5-12bar 0,5-12bar
Protection IP55 IP55
Max water temperature 40°C 40°C
Max ambient temperature 0-50°C 0-50°C
Fuse 10A 20A
T
and cannot be used with other liquids.
CHAPTER 3
It is essential to install a check valve or foot valve on the suction side of the pump in case of positive suction head installation.
the pump resulting in having to repeat the subsequent pump priming procedure.
CHAPTER 4

ELECTRICAL CONNECTION

WARNINGS:
•
prevent possible electric shock.
•
•
•
device
• Electrical connection must be performed according to the local regulations in force.
• The electrical conductors must in particular be protected from high temperatures, vibrations and bumps that could cause
mechanical or chemical damage.
•
(30mA class A or AC) and secured with a 16A circuit breaker for VSD 6 M/T and 10 M/T and 20A for VSD 9 T/T and 14 T/T
•
standard requirements in force.
EN
VSD 9 T/T VSD 14 T/T
3~400Vca 3~400Vca
9A 14A
20% per 10s 20% per 10s
16bar 16bar
0,5-12bar 0,5-12bar
IP55 IP55
40°C 40°C
0-50°C 0-50°C
pump 16A 25A
general 20A
15