Mx Onda MX-CDP2692 Manual De Usuario E Instalacion página 32

This unit operates with a voltage of 230 V, to avoid a possible electrical shock
not try to open it. This equipment does not have part some that could be
repaired by your, in the event of a wrong operation not manipulate it, and
attend to an Official Technical Service MX ONDA.
Waste electrical products must not be disposed of with
household waste.
This equipment should be taken to your local recycling centre
for safe treatment.
This product complies with European Directives
RoHS (2011/65/UE), on the restriction of use of
certain dangerous substances in electrical and
electronic appliances.
INTRODUCTION
Congratulations on the purchase of your new MX ONDA decorative wall-
mounted extractor hood, model MX-CDP2692.
We recommend that you spend some time reading this Installation and User
Manual to fully understand how to properly install and operate it. Before
installing the hood, consult the installation section of this manual.
Among others, it incorporates the following features:
Housing and chimney in black or white
Tempered glass folding front
Touch-type controls with acoustic warning
3 extraction speeds
LED lighting (2 x 1.5 W)
Motor power: 190 W
Energy class: B
Dynamic fluid efficiency class: A
Lighting efficiency class: A
Grease filtering efficiency class: D
Sound level: ≤ 68 dB
Extraction capacity: 700 m³ / h
Aluminum filters with 5 filter levels
Backflow valve
Air outlet diameter: 150 mm
WARNING
2