Instructions for use
•
Place the food in the container.
•
Check that the hole inside the lid (Fig.4)
is not blocked.
•
Check that the lid's sealing joint (Fig. 4)
is correctly positioned and that the
contact surfaces between the container
and the joint are perfectly dry.
•
It is important that the box is closed
correctly.
•
Place the lid on the container by folding
down the lid from the back (Fig.5)
and locking it using the handle on the
front (Fig.5).
•
Then check that the lid is adjusted
correctly.
Placing under vacuum
•
Pull the valve's safety catch (Fig.6).
•
Place the box on top of the left-hand
vegetable compartment and push it in
fully until the receptacle's valve is in
contact with the connection system.
•
The
vacuum
automatically after a few seconds.
•
Do not touch the box any longer and
close the refrigerator.
generator
starts
Fig. 4
Fig. 5
Fig. 6
up
4
EN