Franke ZAQUA005 Instrucciones De Montaje Y Uso página 7

Pin Signal
3 Data-H
4 Data-L
5 24 V
6 GND
7 Data-H
8 Data-L
UPS (battery module)
Pin Signal
1 UPS
2 GND
3 24 V
Digital inputs IN1 through IN4 (Input) and digital outputs OUT1 through OUT2 (Output)
Pin: Signal:
Input 1 IN1
Function:
Start command for thermal disinfection
☞
The contact must be closed at least 5 s and no more than 2 minutes
• While the thermal disinfection process is underway, a short pulse is considered a
cancellation of this function. A safety window of at least 30 s passes before the
fittings are flushed, and the system then returns to its normal mode of operation.
This process is then recorded as being "not successful".
• OUT1 is acknowledged by pressing at least 3 s
Pin: Signal:
Input 2 IN2
Level
±0.2 V DC up to
±5 V DC
±0.2 V DC up to
±5 V DC
24 V DC
0 V DC
±0.2 V DC up to
±5 V DC
±0.2 V DC up to
±5 V DC
Level
LOW
HIGH
Reference
24 V DC
Level with
function:
LOW
Level at
function:
LOW
Current Function
Data-bus for bus-isle
3 A Supply voltage for bus
isle looped through
Reference for bus isle
looped through
Data-bus for bus-isle
Current Function
UPS plugged on
no UPS plugged on
2.5 A Supply voltage for bus
isle looped through
Max. line length:
3 m
Max. line length:
3 m
7