Franke ZAQUA005 Instrucciones De Montaje Y Uso página 8

Function:
Start command for hygiene flushing
☞
This is triggered with a pulse.
• Only for fittings that have this corresponding function backed up within the program
ID and which have a flow duration set.
• In such fittings the hygiene flushing process is performed 1x.
Pin: Signal:
Input 3 IN3
Function:
Start command for cleaning circuit.
☞
This is triggered with a pulse.
• Fittings within the network are brought on-line to the cleaning mode. Fittings can not
be triggered.
Stop command for switching off cleaning
☞
With further pulse
Cleaning switch-off is automatically terminated after 10 min.
Pin: Signal:
Input 4 IN4
Function:
Zone switching
e.g. for: summer/winter mode, day/night mode or room occupied/not occupied.
☞
The input can be connected with a switch, time switch or GLT contact.
• Functionality depends on the contents of the program ID within the electronic
module.
Pin: Signal:
GND IN GND
Function:
Reference for IN1 through IN4
e.g. for: summer/winter mode, day/night mode or room occupied/not occupied.
Pin: Signal:
OUTPUT1 OUT1
8
Level at Max. line length:
function:
LOW 3 m
Level with Max. line length:
function:
HIGH zone A 3 m
LOW zone B
Level: Max. line length:
Reference 3 m
Level: Max. line length:
4 V DC 3 m
Current
10 mA