Button Functions - Klarstein SABRINA Manual Del Usuario

EN

BUTTON FUNCTIONS

Press this button to switch the unit and motor on and off.
When the power is on, hold down the Timer button to set the current time.
Press the light button to adjust the hours. Press and hold the light button to
quickly adjust the hours. Press the fan button to adjust the minute. Press and
hold the Fan button to quickly adjust the minutes. If the time is set correctly,
press the Timer button to confirm or wait 10 seconds for the time to be set
automatically.
With the fan shaded, press the Timer button to set the off timer (1-60
minutes). When you have set the timer, wait 10 seconds. The set time is then
automatically accepted and the timer counts the time down. As soon as the
set time has elapsed, the unit automatically switches to standby mode.
When the unit is switched on, briefly press the light button to switch the light
on and off.
When the light is on, briefly press the fan button to start the motor at high
speed. Press the button several times to set the speed in the following order:
High > Medium > Low > Off > High...
21