VITO PRO-POWER WR2 130B LITE Manual De Instrucciones página 35

The washer blows smoke:
• Overheating, overloading or damaged motor;
Excessive noise:
• The pump is sucking air;
• Water inlet filter is clogged;
No detergent suction:
• The spray nozzle is not set to the minimum
pressure;
• Detergent injector is clogged;
• The tank, suction hose and filter are clogged;
• Turn the washer off and call technical assistance;
• Check that there are air inlets to the pump or
suction pipes.
• Check water supply tap and hose and the water inlet
filter;
• Set spray nozzle to minimum pressure;
• Call technical assistance;
• Clean the tank, suction hose and filter;
35