Names And Functions Of Parts - Esoteric Grandioso G1X Manual Del Usuario

Names and functions of parts

A
STABLE (oven status) indicator
This shows the clock status .
This blinks when warming up or when an error occurs . It stops
blinking and stays lit when output stabilizes .
B
POWER button
Press this to turn the unit on and off .
When the unit is on, the power indicator lights .
o When the POWER button is turned on, the unit starts warming
the crystal oscillator (OCXO) up to its operating temperature .
It takes about ten minutes for the oscillator frequency to
stabilize .
V
Turn this unit's POWER button and PREHEAT
switch off when you do not plan to use it for an
extended amount of time.
C
Power indicator
This lights when the unit is on .
10
A B C D
D
Clock output indicators
These show the status of each of the 10MHz OUT connectors .
From left to right, the indicators correspond to 10MHz OUT 1, 2,
3, 4 and 5 .
Only indicators for channels being output light .
If an output connector on the back is set to A . G ND (Adaptive
Zero Ground), the indicator will light green .