Basic operation
1
Press the POWER button to turn this unit on.
2
Start playback on the connected device after
the STABLE (oven status) indicator lights.
o We recommend waiting until the oscillator stabilizes after the
power is turned on .
Troubleshooting
If you experience a problem with this product, please take a moment
to review the following information before requesting service .
If this product still does not operate correctly, contact the retailer
where you purchased it .
The unit does not turn on.
e Check that the power cord is plugged into a working power
outlet .
e Check that the power cord is properly connected to this unit .
The clock output is not synchronizing another device.
e Confirm that the connected device supports 0 . 5 Vrms 10MHz
clock .
Since clock signals that can be synchronized depend on how
each device is connected and set, refer to the operation manuals
of each device .
The STABLE (oven status) indicator never stops blinking.
e The oscillator can take about ten minutes until its oscillation
stabilizes .
11