Trouble Shooting/Repairs - CELO FORCE ONE Manual De Instrucciones De Funcionamiento

e Do not use the tool in the rain or in a very humid place. Ne-
glect of this causes a trouble.
f Beware of the high temperature of the tool. If the tool is used
for a long period of time, the nose and contact nose will be-
come hot. Be careful not to get a burn.
g Always remove the Fuel Cell and the Battery from the tool
and empty the magazine when operation has been com-
pleted or suspended, when unattended, moving to a differ-
ent work area, adjusting, disassembling, or repairing the
tool, and when clearing a jammed fastener.
STORAGE
1 When not in use for an extended period, apply a thin coat of
the lubricant to the steel parts to avoid rust.
2 Do not store the tool in a cold weather environment. Keep
the tool in a warm area.
3 When not in use, the tool should be stored in a warm and
dry place.
4 Keep out of reach of children.
5 When not in use, disconnect from fuel cell and battery, un-
load fasteners, and store in a secure location.

TROUBLE SHOOTING/REPAIRS

The troubleshooting and/or repairs shall be carried out only by
the Celo authorized distributors or by other specialists.
For the repair of the tools, only spare parts specified by Celo shall
be used.
When disposing the tool or its parts, follow the relevant national
rules.
4