A.
B.
C.
D.
E.
F.
CAPABILITIES
Will shred: Paper, plastic credit cards, CD/DVDs and staples
Will not shred: Adhesive labels, continuous form paper, transparencies, newspaper,
cardboard, laminates, paper clips, file folders, X-rays or plastic other than noted above
Paper shred size:
Micro-Cut .................................................................... 5/64 in. x 1/2 in. (2mm x 12mm)
Card/CD shred size:
Strip-Cut .................................................................................................1-1/2 in. (40mm)
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
manual. Read the entire instruction manual before operating shredders.
to off or unplug when not in use.
openings. If object enters top opening, switch to Reverse (
Vapors from propellants and petroleum based lubricants may combust causing
serious injury
Do not place near or over heat source or water.
2
G.
H.
KEY
A. CD/card entry
B. Paper entry
C. See safety instructions
D. Window
E. Pull-out bin
F. Casters
G. ON/OFF switch
1. OFF
2. ON
Maximum:
Sheets per pass ............................................................................................................. 9*
Cards/CDs per pass ....................................................................................................... 1*
Paper entry width .............................................................................8-11/16 in. (220mm)
CD entry width .................................................................................4-13/16 in. (122mm)
* 8.5 in. x11 in., 20lb., (75g) paper at 120V, 60 Hz, 2.5Amps; heavier paper, humidity or
other than rated voltage may reduce capacity. Maximum recommended daily usage rates:
300 sheets per day; 25 credit cards; 10 CDs.
action will stop shredder immediately.
) to back out object.
transformers, or extension cords should not be used with this product.
H. Control Switch and LEDs
1. Forward
2. Auto On (green)
3. Reverse
4. Overheat (red)
5. Remove paper (yellow)
9 sheets per pass to avoid jams.
ENGLISH
Model 450M
(I) position to